Publikationen

The objective fitting of hearing aids and cochlear implants remains a challenge. In particular, the determination of whether sound is perceived as too loud or comfortable represents an unsolved problem in noncooperative patients. In a first step of an ongoing study, we assess the feasibility of habituation correlates in late auditory evoked potentials (LAEPs) to discriminate between a soft sound (SS) of 50 dB SPL and a loud sound (LS) of 100 dB SPL. We applied a new sweep-to-sweep time-scale coherence measure to analyse the habituation in LAEPs, i.e., relative changes within sweep sequences. From the comparison between both stimulation levels, a total discrimination of responses to SS and LS in the individual normal hearing subject was possible. As just relative changes in SS and LS sweep sequences were considered, purely exogenously driven morphological alternations in the responses such as intensity related amplitude and latency changes were excluded from the analysis. It is concluded that the proposed method allows for the reliable detection of auditory habituation and differentiation of SS from LS. The proposed scheme might provide an electrophysiological measurement and signal processing framework for the objective detection of the most comfortable loudness level and can be used in further, more clinically oriented studies.

Tinnitus is one of the most common symptoms affecting people all over the world. In the absence of an established cure many individuals are not only faced with the need to adjust to the sensation of the tinnitus noise, but also with psychological comorbidities. In recent years, different studies have been directed to elucidate the psychophysiological mechanisms that are involved in the tinnitus decompensation. From these, special emphasis has been placed on studies related to attention and habituation, which accordingly play a crucial role in current tinnitus therapy approaches. In spite of such progress, the relationship between selective attention and the tinnitus decompensation with respect to large-scale neural correlates is still not well understood. In order to address this issue, we propose an integrative multiscale modeling approach for studying neural correlates of auditory selective attention in the tinnitus decompensation. Computational simulations based on our model confirmed electroencephalographic human data of both auditory selective attention and the tinnitus decompensation. It is concluded that the proposed methodology represents a promising approach to give insight into the neurodynamics of auditory selective attention in the tinnitus decompensation.

Auditory evoked cortical potentials (AECPs) have been consolidated as a diagnostic tool in audiology. Further applications of this technique are in experimental neuropsychology, neuroscience, and psychiatry, e.g., for the attention deficit disorder, schizophrenia, or for studying the tinnitus decompensation. In particular, numerous psychophysiological studies have emphasized their dynamic characteristics in relation to exogenous and endogenous attention. However, the effect of corticothalamic feedback dynamics to neural correlates of focal and nonfocal attention and its large-scale effect reflected in AECPs is far from being understood. To address this issue, we model neural correlates of auditory selective attention reflected in AECPs by using corticothalamic feedback dynamics. In our framework, we make use of a well-known multiscale model of evoked potentials, for which we define for the first time a neurofunctional map of relevant corticothalamic loops to the hearing path. Such loops are in turn are coupled to our proposed probabilistic scheme of auditory selective attention. It is concluded that our model represents a promising approach to gain a deeper understanding of the neurodynamics of auditory attention and might be used as an efficient forward model to support hypotheses that are obtained in experimental paradigms involving AECPs.

Bacteriorhodopsin, reconstituted with a sterically "locked" retinal chromophore, BR5.12, has frequently been used to elucidate elementary photoinduced processes in the native pigment bacteriorhodopsin. In this work, the vibrational response of BR5.12 to photoexcitation is investigated by means of femtosecond time-resolved mid-infrared and UV-vis spectroscopy. The electronically excited state of BR5.12 decays with a time constant of 18 ps. Neither in the UV-vis nor in the mid-IR spectral region are indications found for chromophore photoproducts, besides the full recovery of the electronic ground state. However, vibrational bands are observed at around 1660 and 1550 cm-1 in the protein amide I and amide II band regions, respectively. They are formed within a few picoseconds or even instantaneously. Thus, they appear faster than the S1 decay and persist for at least 130 ps, i.e., for Much longer than the S1 lifetime. These findings strongly suggest that the observed bands must be assigned to protein vibrations and that they are not caused by a photoinduced temperature rise. Thus, for the first time, ultrafast protein vibrational changes are detected in BR5.12, that are not associated with isomerization. Possibly they can be related to the enhanced chemical reactivity of photoactivated BR5.12 reported in the literature. In wild-type bacteriorhodopsin, bands with very similar spectral and kinetic characteristics are observed, suggesting that they might originate from a similar mechanism which is not isomerization. A plausible mechanism is a polarization induced protein conformational change, as discussed in the literature.

Essential for the biological function of the light-driven proton pump, bacteriorhodopsin (BR), and the light sensor, sensory rhodopsin II (SRII), is the coupling of the activated retinal chromophore to the hosting protein moiety. In order to explore the dynamics of this process we have performed ultrafast transient mid-infrared spectroscopy on isotopically labeled BR and SRII samples. These include SRII in D2O buffer, BR in H218O medium, SRII with 15N-labeled protein, and BR with 13C1413C15-labeled retinal chromophore. Via observed shifts of infrared difference bands after photoexcitation and their kinetics we provide evidence for nonchromophore bands in the amide I and the amide II region of BR and SRII. A band around 1550 cm-1 is very likely due to an amide II vibration. In the amide I region, contributions of modes involving exchangeable protons and modes not involving exchangeable protons can be discerned. Observed bands in the amide I region of BR are not due to bending vibrations of protein-bound water molecules. The observed protein bands appear in the amide I region within the system response of ca. 0.3 ps and in the amide II region within 3 ps, and decay partially in both regions on a slower time scale of 9-18 ps. Similar observations have been presented earlier for BR5.12, containing a nonisomerizable chromophore (R. Gross et al. J. Phys. Chem. B 2009, 113, 7851-7860). Thus, the results suggest a common mechanism for ultrafast protein response in the artificial and the native system besides isomerization, which could be induced by initial chromophore polarization.

The marine bacterium strain MC-1 is a member of the alpha subgroup of the proteobacteria that contains the magnetotactic cocci and was the first member of this group to be cultured axenically. The magnetotactic cocci are not closely related to any other known alphaproteobacteria and are only distantly related to other magnetotactic bacteria. The genome of MC-1 contains an extensive (102 kb) magnetosome island that includes numerous genes that are conserved among all known magnetotactic bacteria, as well as some genes that are unique. Interestingly, certain genes that encode proteins considered to be important in magnetosome assembly (mamJ and mamW) are absent from the genome of MC-1. Magnetotactic cocci exhibit polar magneto-aerotaxis, and the MC-1 genome contains a relatively large number of identified chemotaxis genes. Although MC-1 is capable of both autotrophic and heterotrophic growth, it does not appear to be metabolically versatile, with heterotrophic growth confined to the utilization of acetate. Central carbon metabolism is encoded by genes for the citric acid cycle (oxidative and reductive), glycolysis, and gluconeogenesis. The genome also reveals the presence or absence of specific genes involved in the nitrogen, sulfur, iron, and phosphate metabolism of MC-1, allowing us to infer the presence or absence of specific biochemical pathways in strain MC-1. The pathways inferred from the MC-1 genome provide important information regarding central metabolism in this strain that could provide insights useful for the isolation and cultivation of new magnetotactic bacterial strains, in particular strains of other magnetotactic cocci.

We characterize 10-nm outer diameter multi-walled carbon nanotubes (powder and dispersion), which will be used for the preparation of conductive layers on polycarbonate (PC) substrates. The optical, electrical, and mechanical characterization of the spin-coated deposited layers is shown and compared with results obtained for layers deposited in borosilicate glass substrates. In both glass and plastic, the layers have shown transmittance higher than 78% in the visible range and have passed the tape and pencil standard tests for adherence and hardness, respectively. However, the sheet resistance presented by layers deposited on PC is still much superior to that of layers deposited on glass and sintered at higher temperatures. Nevertheless, the results obtained still allow the use of such layers in antistatic applications.

Nanocomposites of TiO2 and multi-walled carbon nanotubes (MWNTs) were produced by the addition of different concentrations of MWNTs to a TiO2 sol matrix. Conductive coatings were prepared by spin coating the nanocomposite sols on glass substrates and sintering the samples at 300 ° C for 15 min. No crystalline phase of TiO2 was formed at this temperature. The sheet resistance of the coatings was decreased from some hundreds of M Ω/sq to just a few k Ω/sq by the addition of MWNTs to the TiO2 matrix. Moreover, sintering of the coatings in a reducing atmosphere has lead to a lower sheet resistance than that presented by coatings sintered in air. The lowest resistivity of 2.0 x 10-1 Ω.cm was obtained by coatings prepared with 5.0 mg/ml MWNTs in the composite sol. The optical, structural and electrical properties of the coatings were correlated and demonstrated.

ITO (tin doped indium oxide) coatings were produced by gravure printing process on PET and PEN foils. The printing paste consists of ITO nanoparticles, which are dispersed in a solvent and mixed with a binder. By modification of the printing paste, the sheet resistance (R/sq) of the ITO coatings after hardening under UV-irradiation at low temperatures (< 130 °C) could be decreased to 1 kΩ/sq. R/sq could be further reduced down to 0.5 kΩ/sq by heat treatment under forming gas atmosphere (N2/H2), the transmission of the ITO coated foils still being more than 80% in the visible range. The application of these ITO films as a bottom electrode in organic photodiodes (OPDs) is shown, and the current density-voltage characteristics of the OPDs are presented.

The fabrication of organic photodiodes on solution cast indium tin oxide (ITO) bottom electrodes on flexible substrates is described. ITO coatings with a sheet resistance of 2 to 3 kΩ/sq are produced by gravure printing process on PEN (polyethylene 2,6-naphthalate) films. The ITO films are directly used as transparent bottom electrodes for organic photodiodes (OPD). Furthermore, first experiments to integrate one of these OPDs in an all-organic opto-chemical sensor are successfully demonstrated. The implementation of OPDs as detectors in applications such as integrated sensors demands a fabrication of these devices on flexible substrates. For these applications the OPDs on printed ITO on PEN are especially suitable.