Scientific publications

Trotz erheblichen Interesses an heteroatomhaltigen konjugierten Polymeren sind Beispiele mit schwereren Elementen des p-Blocks im Konjugationspfad rar. Die kürzlich beschriebene Metathese schwererer acyclischer Diene (HADMET) ermöglichte die Synthese eines Ge=Ge-Doppelbindungen enthaltenden Polymers, wenn auch eines unlöslichen mit begrenztem Polymerisationsgrad. Durch Einführung langer Alkylketten erhielten wir nun lösliche Vertreter mit – nach diffusionsabhängiger NMR-Spektroskopie (DOSY) und dynamischer Lichtstreuung (DLS) – nahezu unendlichen Polymerisationsgraden. UV/Vis und NMR-Daten bestätigen das Vorliegen von σ,π-Konjugation entlang der Silylen-Phenylen-Verknüpfungen zwischen den Ge=Ge-Einheiten. Günstige intermolekulare Dispersionswechselwirkungen führen zu leiterartigen, zylindrischen Aggregaten, wie durch Röntgendiffraktometrie (XRD), Kleinwinkel-Röntgenstreuung (SAXS) und DLS bestätigt. AFM- und TEM-Bilder abgeschiedener dünner Schichten offenbaren eine lamellare Anordnung ausgedehnter Polymerbündel.

Despite considerable interest in heteroatom-containing conjugated polymers, there are only few examples with heavier p-block elements in the conjugation path. The recently reported heavier acyclic diene metathesis (HADMET) allowed for the synthesis of a polymer containing Ge=Ge double bonds—albeit insoluble and with limited degree of polymerization. By incorporation of long alkyl chains, we now obtained soluble representatives, which exhibit degrees of polymerization near infinity according to diffusion-ordered NMR spectroscopy (DOSY) and dynamic light scattering (DLS). UV/Vis and NMR data confirm the presence of σ,π-conjugation across the silylene-phenylene linkers between the Ge=Ge double bonds. Favorable intermolecular dispersion interactions lead to ladder-like cylindrical assemblies as confirmed by X-ray diffraction (XRD), small angle X-ray scattering (SAXS) and DLS. AFM and TEM images of deposited thin films reveal lamellar ordering of extended polymer bundles.

This study explores the potential of re-purposing end-of-life commercial supercapacitors as electrochemical desalination cells, aligning with circular economy principles. A commercial 500-Farad supercapacitor was disassembled, and its carbon electrodes underwent various degrees of modification. The most straightforward modification involved NaOH-etching of the aluminum current collector to produce free-standing carbon films. More advanced modifications included CO2 activation and binder-added wet processing of the electrodes. When evaluated as electrodes for electrochemical desalination via capacitive deionization of low-salinity (20 mM) NaCl solutions, the minimally modified NaOH-etched carbon electrodes achieved an average desalination capacity of 5.8 mg g−1 and a charge efficiency of 80 %. In contrast, the CO2-activated, wet-processed electrodes demonstrated an improved desalination capacity of 7.9 mg g−1 and a charge efficiency above 90 % with stable performance over 20 cycles. These findings highlight the feasibility and effectiveness of recycling supercapacitors for sustainable water desalination applications, offering a promising avenue for resource recovery and re-purposing in pursuing environmental sustainability.

Organic materials have emerged as highly efficient electrodes for electrochemical energy storage, offering sustainable solutions independent from non-renewable resources. In this study, we showcase that mesoscale engineering can dramatically transform the electrochemical features of a molecular organic carboxylic anode. Through a sustainable, energy-efficient and environmentally benign self-assembly strategy, we developed a network of organic nanowires formed during water evaporation directly on the copper current collector, circumventing the need for harmful solvents, typically employed in such processes. The organic nanowire anode delivers high capacity and rate, reaching 1888 mA h g−1 at 0.1 A g−1 and maintaining 508 mA h g−1 at a specific current of 10 A g−1. Moreover, it exhibits superior thermal management during lithiation in comparison to graphite and other organic anodes. Comprehensive electrochemical evaluations and theoretical calculations reveal rapid charge transport mechanisms, with lithium diffusivity rates reaching 5 × 10−9 cm2 s−1, facilitating efficient and rapid interactions with 24 lithium atoms per molecule. Integrated as the negative electrode in a lithium-ion capacitor, paired with a commercially available porous carbon, the cell delivers a specific energy of 156 W h kg−1 at a specific power of 0.34 kW kg−1 and 60.2 W h kg−1 at 19.4 kW kg−1, establishing a benchmark among state-of-the-art systems in the field. These results underscore the critical role of supramolecular organization for optimizing the performance of organic electrode materials for practical and sustainable energy storage technologies.

Polyacrylamide (PAAm) hydrogels are widely adopted as 2D-model soft substrates for investigating cell-material interactions in a controlled in vitro environment. They offer facile synthesis, tunable physico-chemical properties, diverse biofunctionalization routes, optical transparency, mouldability in a range of geometries and shapes, and compatibility with living cells. PAAm hydrogels can be engineered to reconstruct physiologically relevant biointerfaces, like cell-matrix or cell–cell interfaces, featuring biochemical, mechanical, and topographical cues present in the extracellular environment. This Review provides a materials science perspective on PAAm material properties, fabrication, and modification strategies relevant to cell studies, highlighting their versatility and potential to address a wide range of biological questions. Current routes are presented to integrate cell-instructive features, such as 2D patterns, 2.5D surface topographies, or mechanical stiffness gradients. Finally, the recent advances are emphasized toward dynamic PAAm hydrogels with on-demand control over hydrogel properties as well as electrically conductive PAAm hydrogels for bioelectronics.

Fingertip friction is a key component of tactile perception. In active tactile exploration, friction forces depend on the applied normal force and on the sliding speed chosen. We have investigated whether humans perceive the speed dependence of friction for textured surfaces of materials, which show either increase or decrease of the friction coefficient with speed. Participants perceived the decrease or increase when the relative difference in friction coefficient between fast and slow sliding speed was more than 20 %. The fraction of comparison judgments which were in agreement with the measured difference in friction coefficient did not depend on variations in the applied normal force. The results indicate a perceptual constancy for fingertip friction with respect to self-generated variations of sliding speed and applied normal force.

Lithium-ion batteries (LIBs) are at the forefront of technological innovation in the current global energy-transition paradigm, driving surging demand for electric vehicles and renewable energy-storage solutions. Despite their widespread use and superior energy densities, the environmental footprint and resource scarcity associated with LIBs necessitate sustainable recycling strategies. This comprehensive review critically examines the existing landscape of battery recycling methodologies, including pyrometallurgical, hydrometallurgical, and direct recycling techniques, along with emerging approaches such as bioleaching and electrochemical separation. Our analysis not only underscores the environmental and efficiency challenges posed by conventional recycling methods but also highlights the promising potential of electrochemical techniques for enhancing selectivity, reducing energy consumption, and mitigating secondary waste production. By delving into recent advancements and juxtaposing various recycling methodologies, we pinpoint electrochemical recycling as a pivotal technology for efficiently recovering valuable metals, such as Li, Ni, Co, and Mn, from spent LIBs in an environmentally benign manner. Our discussion extends to the scalability, economic viability, and future directions of electrochemical recycling, and advocates for their integration into global battery-recycling infrastructure to address the dual challenges of resource depletion and environmental sustainability.

Cofactor regeneration systems are of major importance for the applicability of oxidoreductases in biocatalysis. Previously, geranylgeranyl reductases have been investigated for the enzymatic reduction of isolated C=C bonds. However, an enzymatic cofactor-regeneration system for in vitro use is lacking. In this work, we report a ferredoxin from the archaea Archaeoglobus fulgidus that regenerates the flavin of the corresponding geranylgeranyl reductase. The proteins were heterologously produced, and the regeneration was coupled to a ferredoxin reductase from Escherichia coli and a glucose dehydrogenase from Bacillus subtilis, thereby enabling the reduction of isolated C=C bonds by purified enzymes. The system was applied in crude, cell-free extracts and gave conversions comparable to those of a previous method using sodium dithionite for cofactor regeneration. Hence, an enzymatic approach to the reduction of isolated C=C bonds can be coupled with common systems for the regeneration of nicotinamide cofactors, thereby opening new perspectives for the application of geranylgeranyl reductases in biocatalysis.

Abstract Extracellular vesicles (EVs), through their complex cargo, can reflect the state of their cell of origin and change the functions and phenotypes of other cells. These features indicate strong biomarker and therapeutic potential and have generated broad interest, as evidenced by the steady year-on-year increase in the numbers of scientific publications about EVs. Important advances have been made in EV metrology and in understanding and applying EV biology. However, hurdles remain to realising the potential of EVs in domains ranging from basic biology to clinical applications due to challenges in EV nomenclature, separation from non-vesicular extracellular particles, characterisation and functional studies. To address the challenges and opportunities in this rapidly evolving field, the International Society for Extracellular Vesicles (ISEV) updates its ‘Minimal Information for Studies of Extracellular Vesicles’, which was first published in 2014 and then in 2018 as MISEV2014 and MISEV2018, respectively. The goal of the current document, MISEV2023, is to provide researchers with an updated snapshot of available approaches and their advantages and limitations for production, separation and characterisation of EVs from multiple sources, including cell culture, body fluids and solid tissues. In addition to presenting the latest state of the art in basic principles of EV research, this document also covers advanced techniques and approaches that are currently expanding the boundaries of the field. MISEV2023 also includes new sections on EV release and uptake and a brief discussion of in vivo approaches to study EVs. Compiling feedback from ISEV expert task forces and more than 1000 researchers, this document conveys the current state of EV research to facilitate robust scientific discoveries and move the field forward even more rapidly.

A special issue highlighting contributions of women to Chemical Research in Toxicology. The United Nations sustainable development goals aim to improve health and education and promote economic growth while reducing inequality and ending poverty. The field of toxicology is intrinsically dedicated to these goals, addressing the protection of the world population through improving public health and ensuring access to clean water and the sustainable consumption and production of safe food. Specifically, the identification and quantification of hazards and exposures, the chemical and molecular understanding of associated biological outcomes, and tools and models for the prediction of adverse outcomes form a solid basis for hazard reduction, substitution, or safe and sustainable design. In this context, the necessity for the full inclusion of women in all areas of sustainable development has been elevated by the United Nations by making the empowerment of all women and girls one of its sustainable development goals. (1) To fully reach this goal, this empowerment must include the eradication of the gender gap in research and experimental development in science. According to the UNESCO Institute for Statistics (UIS), in 2016, only 29.3% of employees in R&D worldwide were women. A closer look reveals that regional averages for the share of female researchers are heterogeneous, ranging from 48% for Central Asia and 33% for North America and Western Europe to 19% for South and West Asia. (2) Furthermore, the representation of women seems to be inverse to academic rank or leadership position. (3) Although in some regions, e.g., in Europe, the absolute number of women employed as scientists and engineers grew over ten years by almost 50% to 7.3 million in 2022, this growth represented only a 2% increase in the proportion of women compared to men. (4) Shares of female researchers in the field of toxicology are less well accessible, but it can be assumed that overall women are underrepresented in this field, similar to other sectors. Based on the great success of the virtual issue of Chemical Research in Toxicology in Celebration of the International Day of Women and Girls in Science published earlier this year, (5) it is our pleasure to invite you to contribute to the planned special issue of Chemical Research in Toxicology, devoted to the promotion of the visibility of women in this field through the dissemination of their research. The CRT special issue “Women in Chemical Toxicology” is being Guest Edited by Prof. Dean Naisbitt and Prof. Sayuri Miyamoto, and CRT Associate Editor Dr. Annette Kraegeloh. This special issue is aimed at promoting the participation and accomplishments of women in the field of chemical toxicology. Therefore, we specifically call for submissions by first or corresponding authors at any stage in their career who identify as women. We welcome your submissions of research Articles, Rapid Reports, Perspectives, Reviews, or ToxWatch manuscripts related to the entire scope of Chemical Research in Toxicology. Authors are invited to send a presubmission inquiry to the Editors that includes an abstract and cover letter indicating the intended manuscript format by e-mail (eic@crt.acs.org). The deadline for submission is Monday, January 15, 2024. We look forward to your contributions!